Microcement Whashington D.C. - Your micro-topping specialist in the area
More than 15 years of experience are enough to make us true experts in continuous coatings. From manufacturing to sales, including application, our mastery of everything related to microcement is total.
All these years of experience have led us to expand and go from being local references, even national, to become world leaders in this type of coatings.
In this way, we have made reforms without works in many cities in different countries, putting all our knowledge in the field available to those professionals who wanted to count on us and take their projects to a higher level. We want to tell you that you can also count on us. If you want to sell our microcement products in Whasington D.C., count on us. We are your ideal partner.
Microcement: a coating full of benefits
Microcement is a constructive-decorative material prepared to be applied on any type of surface, fulfilling both facets to perfection thanks to a very thin thickness, 3 mm thick, and a large number of properties.
In the construction field, thanks to its adhesion, it can be applied on any type of surface. Interior spaces, exteriors, kitchens, bathrooms, bedrooms, offices, garages, large commercial areas, microcement can be applied in all types of locations.
In addition, as it does not generate joints, it creates spaces full of continuity and luminosity, increasing the amplitude of any space. Another consequence that goes hand in hand with its continuous feature is that by not using such joints, cleaning is very quick and easy because dirt does not accumulate in nooks and crannies that can be difficult to access.
In addition to these, this material has other benefits as you will see below.
Resistant on any surface
Never before has a coating with a fineness of less than 5 mm demonstrated such high chemical or mechanical resistance. This makes it adaptable to any location as well as to the needs of architects or decorators to guarantee maximum performance in any type of project, whether domestic or professional.
Flexibility to adapt to everything
Its composition based on resins, cement, water and additives is what gives it that flexibility that makes it adapt to vertical or horizontal surfaces, and interiors, whether floors, walls and ceilings, even furniture, always achieving finishes that other products are not able to give.
Aesthetic versatility anywhere
Microcement is a product that mixes a traditional way of doing things with the latest decorative trends. Thus, the finishes that can be achieved with this coating, in the hands of expert applicators, are called to mark an era.
Extra fast application, without construction work
Compared to other materials, microcement has the ability to be applied, without the need for construction work, on wood, ceramic, tiles or concrete, among others. Thus, each application becomes a quick process that saves both time and money.
Its value is greater than its cost
As it does not require construction work to carry out the reforms and is applied directly on the supports that are already there, it is not necessary to hire machinery and the final removal of debris. This means that it can be applied quickly and saves costs in labor, achieving, in addition, a very high level of finishes, difficult to achieve with other materials in the sector.
Internationally recognized for our microcements
To become a reference in the microcement sector, you have to control all aspects to perfection without neglecting innovation. In fact, each of our products has the latest technology and maximum quality that has been recognized internationally, as they are ISO 9001:2015 certified.
Why to use microcement in Washington D.C.: a multipurpose material
Something key in a material used in the construction sector is its versatility to adapt to any type of space, and this is precisely one of the qualities that stand out in microcement.
Thus, it does not matter the layout, vertical or horizontal, of the surface to be coated because its adhesion adapts to ceilings, walls or floors without any problem and always ensuring the best finishes.
It is also indifferent if the area to be coated is located in areas with more or less humidity, or indoors or outdoors, this material can be applied in kitchens, on countertops, floors or walls; in bathrooms, where you can even coat the shower tray or walls; a terrace, outdoors, exposed to sunlight and changing conditions of being outdoors ... any space can have areas coated with microcement.
Thus, this continuous coating can be applied in residential or industrial areas. Thus, it can be applied from homes to factories, always providing very high resistance and giving aesthetic guarantees available to few materials used in the world of reforms.
Quality products for microcement professionals in Washington D.C.
At Topciment® we have a wide range of products ready to exceed the expectations of both customers and microcement professionals in Washington D.C. In our range of continuous coatings you will find from specialized coatings for floors to those that have been designed and manufactured for application in swimming pools. Below are just a few of the products in our range.
Microbase: the preparation that floors and walls need
This microcement preparation, available in single-component and two-component, is the ideal base for later applying the microcement finish you want, depending on the finish you are looking for. When applied in the first instance, it guarantees the results of durability and fixation of the aesthetic effects so that they are maintained for as long as possible.
Horizontal and vertical surfaces can be coated with different types of grain for maximum customized results.
Microfino: thin and very hard walls and ceilings
Microfino demonstrates that fineness and robustness can be perfectly combined as a microcement that responds perfectly on walls and ceilings, but also, thanks to its properties, on floors.
Available as a bicomponent or monocomponent, the naturalness is present in all its finishes, among which stand out those with water effect that can be achieved with this coating.
Microdeck: infinite and non-slip floors
Creating non-slip surfaces without the use of sealing varnish is the specialty of this microcement for floors that demonstrates its resistance to wear and traffic in both indoor and outdoor areas such as terraces.
Manufactured as a monocomponent or bicomponent, it gives the option of achieving multiple finishes, even those that can only be achieved with the "fresco on fresco" technique.
Atlanttic: the microcement suitable for swimming pools
Atlanttic is a latest-generation microcement with specific properties that make it suitable for use in swimming pools. Non-slip and waterproof, it can be applied both in glass, as in crown or curbs to create water-resistant surfaces, both those that are submerged and those that are not. In addition, it prevents the slips so common in these spaces.
Although it has a wide chromatic range, it is recommended to choose between white and off-white to avoid the possibility of whitish stains. It is also the ideal coating for fountains, saunas or ponds.
Microstone: firm exteriors first and foremost
This microcement, for all the chemical and mechanical resistance it possesses, is recommended for outdoor application. Rain, drastic temperature variations, UV rays or wind do not damage this two-component coating at all.
It has a thicker aggregate, which is what gives it the ability to resist high traffic, shock and abrasion and makes it ideal for terraces or facades. It also has the ability to create anti-slip surfaces.
Industtrial: high-performance epoxy microcement
As it contains epoxy resins in its composition, it has very high mechanical and chemical resistance, superior to other products. Thus, it becomes the specific microcement for coating warehouses, parking lots, offices or other indoor surfaces that are exposed to high traffic of both people and vehicles as well as high pressures.
With only two preparatory coats and one finishing coat, it creates areas with a hardness that makes it resistant to any threat. Available in 16 colors that can be applied on interior floors, it is recommended not to be used outdoors as it may yellow when in contact with the sun's rays.
Quartz effect: ready-to-use microcement
As it comes mixed, it allows a much faster application, just by uncovering the bucket, facilitating the work of professional applicators to the maximum and reducing execution times.
For this reason, it is recommended for any type of renovation, as it can be carried out in record time and always guarantees the best results. Only two coats of preparation and one coat of finish will be more than enough for interior or exterior floors or walls to change their appearance for a more modern and stylish one. It is available in 16 colors for greater customization.
Natture: the most decorative lime-based microcement
Being manufactured in lime base, the hardness of this microcement increases becoming the coating with finishes full of naturalness that offers greater durability.
Apart from its excellent mechanical resistance, its 4 granulometries and the 34 colors in which it is available also give it very high aesthetic qualities. In fact, only with Natture can tadelakt and fair-faced concrete effects be achieved. These can be achieved thanks to its maneuverability on both indoor and outdoor floors and walls.
Other decorative coatings to achieve the desired finishes
At Topciment® we are aware that technique and aesthetics must be combined in order to create spaces that are memorable. For this reason, we also have a range of decorative coatings that increase, if possible, the aesthetic possibilities of our microcements.
Pure Mettal and Classic Mettal, for metallic finishes
These two paints make their metallic finishes available to applicators so that they can create surfaces that are part of the latest decorative trends. With Pure Mettal (two-component) and Classic Mettal (ready-to-use) you can create exclusive floors and walls full of fantasy.
Mettal Activator for rust effects
Authentic vintage style in a room is inconceivable without touches of rust effects. This is precisely what is achieved by combining this rust accelerator with Pure Mettal or Classic Mettal paints.
Printed concrete, for a thousand textures
There is only one material that allows to reproduce finishes and textures of other elements such as wood, natural stone and slate in a very economical and very realistic way: it is printed concrete, a coating that allows to achieve results full of beauty and smoothness full of resistance.
Your microcement project in Washington D. C. at the best price
The price of microcement does not depend exclusively on the product, since we must also take into account the application and all that this entails or different factors that may intervene to determine the total cost.
Thus, we must take into account the state of the surface to be coated and if it is to be repaired, what are the dimensions of this area, how many applicators will be needed to perform the reform, the quality and experience of these.
Only by taking into account all these variables will it be possible to obtain a fixed price, for this reason, in Topciment® we always recommend that those interested ask us for an estimate in order to be able to elaborate it completely adapting it to their individual situation.
Our know-how as microcement experts in Washington D.C.
Since we started, at Topciment® we continue to push ourselves every day as if it were the first day. It is the only way to achieve a unique way of doing things, both in the manufacture and application of our microcements, with our method of essence totally handmade.
That is the key to success to guarantee the highest quality in any situation. In addition, you should always count on the fact that all the renovations we carry out are done with 100% manual application methods that result in totally personalized finishes.
Unquestionable Professionalism and Reliability
At Topciment® we have reached the point where we are because we have always demonstrated our professionalism in any field. We were very clear about the path to follow and we knew that seeking to improve day by day was the only way to manufacture the best products in order to satisfy the most demanding customers.
That is why, because we want to leave a mark on them, we are a reliable company that has earned the trust of many people around the world and that we can also do the same with our way of working and our microcements in Washington D.C.
We also train in microcement
We make sure that our way of doing things does not stop at producing high quality coatings, but we want more and more applicators to learn the best techniques to achieve the finishes they want.
Thus, we train professionals who are not part of our team of applicators, so that more and more spaces benefit from the advantages of a great application.
In our training courses, we teach how we work at Topciment®, with our products, so that each application, whatever the surface, is impeccable.
The microcement partner in Washington D.C. you need
By becoming a Topciment® partner you will have the quality of a range of products that are more than contrasted and are a reference in the market, as well as the necessary advice on the aspect you need.
Our customer service department is at your disposal whenever you want, to solve any doubt about the aspect of our products that you want to know.
The time has come to take a step forward and join a leading company in the field of decorative coatings that will lead you to become a reference of microcement in Washington D.C. and its nearby towns.
Contact us
Do you need to carry out a project with microcement in Washington D.C.? Do you need other types of solutions for your customers? Contact us to find all the answers you need.