menu
Cerrar

Epoxy microcement for continuous interior flooring | Industtrial

Industtrial is our exclusive product line of epoxy microcement (arid + epoxy resin). A decorative continuous coating especially for interior walls and floors. In this product we have combined the excellent performance of our two-component microcements with the extra hardness provided by epoxy resins.

The result is a continuous coating of very high results, especially for continuous interior pavements and floors. An epoxy microcement with excellent workability and unbeatable resistance to abrasion and pedestrian traffic.

In addition, our two-component water-based epoxy microcement Industtrial stands out for its very natural mineral finish and for its superior impermeability compared to conventional microcement systems.

Industtrial is available in 16 colours and 4 granulometries: Industtrial XL, Industtrial Base, Industtrial Medio and Industtrial Liso.

Logo Industtrial XL

Industtrial XL epoxy microcement for floor and paving preparation

Industtrial XL is our epoxy microcement for the preparation of epoxy floors and paving. After applying this decorative continuous coating to any interior floor or screed, one coat of Industtrial Medium should be applied to complete the epoxy system.

Although Industtrial XL is intended for interior epoxy floor and wall coverings, it can also be used on walls if a specific finish is required.

Download here the Industtrial XL technical data sheet.

Types of epoxy microcement for floor and paving preparation Industtrial XL

Industtrial  XL 18 kG
Industtrial XL 18 Kg
Industtrial  XL 4,5 kg
Industtrial XL 4,5 Kg

Industtrial XL floor preparation epoxy microcement characteristics

icono ph
pH of Component A

9,5 ± 1

Densidad aparente
Density

1,65 ± 0,02 g/mL (Component A)
At 25ºC 1,16 g/mL (Component B)

icon
Total cure

7- 14 days

icono dureza
Higher hardness and water resistance

Resists abrasion, foot traffic and chemical agents such as ammonia, soft drinks or coffee

Consumption

The consumption of Industtrial XL epoxy microcement for interior floors and paving is: 1.40 Kg/m2 (1 coat).

Packaging

Industtrial XL epoxy microcement for preparation of interior floors and pavements is available in two types of packaging. Containers of 4,5+0,5 Kg of A+B for pigmenting with 100g of ARCOCEM PLUS and containers of 18+2 Kg of A+B for pigmenting with 400g of ARCOCEM PLUS.

Logo Industtrial Base

Industtrial Base epoxy microcement for wall preparation

Industtrial Base is our epoxy microcement preparation coating for interior wall coverings. After applying this decorative continuous coating for walls, one coat of Industtrial Liso must be applied to complete the epoxy system.

Download here the Industtrial Base technical data sheet

Types of epoxy microcement for wall preparation Industtrial Base

Industtrial  Base 18 kG
Industtrial Base 18 Kg
Industtrial  Base 4,5 kg
Industtrial Base 4,5 Kg

Industtrial Base epoxy microcement wall preparation characteristics

icono ph
pH of Component A

9,5 ± 1

Densidad aparente
Density

1,65 ± 0,02 g/mL (Component A)
At 25ºC 1,16 g/mL (Component B)

icon
Total cure

7- 14 days

icono dureza
Higher hardness and water resistance

Resists abrasion, foot traffic and chemical agents such as ammonia, soft drinks or coffee.

Consumption

The consumption of Industtrial Base epoxy microcement for preparing interior walls is: 1.20 Kg/m2 (1 coat).

Packaging

The epoxy microcement for interior wall preparation Industtrial Base comes in packaging of 4.5+0.5 Kg of A+B, for pigmenting with 100g of ARCOCEM PLUS, and 18+2 Kg of A+B for pigmenting with 400g of ARCOCEM PLUS.

Logo Industtrial Medio

Industtrial Medio epoxy microcement for finishing floors and pavements

Industtrial Medio is our epoxy microcement for finishing epoxy floors and paving in interior spaces. To obtain this decorative continuous flooring, it is necessary to apply two coats of Industtrial XL beforehand.

As with Industtrial XL, although Industtrial Medio is specially designed for epoxy floors and interior flooring, it can also be applied on walls if a different finish is required.

Download here the Industtrial Medio data sheet

Types of epoxy microcement for finishing floors and pavements Industtrial Medio

Industtrial  Medio 18 kG
Industtrial Medio 18 Kg
Industtrial  Medio 4,5 kg
Industtrial Medio 4,5 Kg

Characteristics of microcement epoxy floor finish Industtrial Medio

icono ph
pH of Component A

9,5 ± 1

Densidad aparente
Density

1,65 ± 0,02 g/mL (Component A)
At 25ºC 1,16 g/mL (Component B)

icon
Total cure

7- 14 days

icono dureza
Higher hardness and water resistance

Resists abrasion, foot traffic and chemical agents such as ammonia, soft drinks or coffee.

Consumption

The consumption of Industtrial Medio epoxy microcement for interior floors and paving is: 0.70 Kg/m2 (1 coat).

Packaging

Industtrial Medio epoxy microcement for finishing interior floors and pavements comes in the packaging containers of 4,5+0,5 Kg of A+B if you want to pigment 100g of ARCOCEM PLUS. There are also containers of 18+2 Kg of A+B if you want to pigment with 400g of ARCOCEM PLUS.

Logo Industtrial liso

Industtrial Liso epoxy microcement for wall finishing

Industtrial Liso is our epoxy microcement ideal for coating interior walls. Two coats of Industtrial Base must be applied beforehand.

Download here the Industtrial Liso technical data sheet

Types of epoxy microcement for wall finishing Industtrial Liso

Industtrial  Liso 18 kG
Industtrial Liso 18 Kg
Industtrial  Liso 4,5 kg
Industtrial Liso 4,5 Kg

Characteristics of microcement epoxy wall finishing Industtrial Liso

icono ph
pH of Component A

9,5 ± 1

Densidad aparente
Density

1,65 ± 0,02 g/mL (Component A)
At 25ºC 1,16 g/mL (Component B)

icon
Total cure

7- 14 days

icono dureza
Higher hardness and water resistance

Resists abrasion, foot traffic and chemical agents such as ammonia, soft drinks or coffee.

Consumption

The consumption of Industtrial Liso epoxy microcement for interior walls is: 0.55 Kg/m2 (1 coat).

Packaging

The epoxy microcement for finishing interior walls Industtrial Liso comes in packaging of 4.5+0.5 Kg of A+B with 100g of ARCOCEM PLUS and containers of 18+2 Kg of A+B ( with 400g of ARCOCEM PLUS).

How to apply Industtrial epoxy microcement on indoor walls and floors

Industtrial epoxy microcement has a high adhesion to mineral substrates, even on direct tile. It is a decorative continuous coating highly recommended for decorating interior walls and floors, especially in areas with high wear such as garages, industrial buildings, gallery floors, stores, waiting rooms, corridors or offices.

In general, Industtrial is an epoxy microcement ideal for those continuous pavements exposed to high pedestrian traffic.

Below, we explain the step-by-step application of Industtrial epoxy microcement on interior floors and walls.

+ Application of Industtrial epoxy microcement on indoor floors and pavements

Step 1. Cleaning and preparation of the substrate.

Ensure that the substrate is dry, clean, free of dust, grease or dirt. In case the floor or indoor flooring is varnished or painted, remove the previous coating.

icon
paso 1 atlanttic

Step 2. Priming.

On mineral or cementitious surfaces it is highly recommended to use the PRIMAPOX family. If dampness is present, use Primapox 100 Barrier

icon
paso 2

Step 3. Pigment and mix.

Homogenise component A and pigment it with the ARCOCEM PLUS colour toner from the INDUSTTRIAL colour chart. Then add component B and mix the two components (see proportions in the data sheet).

icono compatible sistemas acuosos
suelos 3

Step 4. Apply two coats of Industtrial XL epoxy microcement

Apply two coats of INDUSTTRIAL XL epoxy microcement with a trowel. Allow to dry for 4 to 12 hours between coats (time depends on temperature and humidity). Sand after each coat with 220 grit sandpaper.

icon
suelos 4

Step 5. Apply one coat of Industtrial Medio epoxy microcement

To finish decorating the interior epoxy floor, apply one coat of INDUSTTRIAL MEDIO epoxy microcement. Allow to dry for at least 48 hours before sealing. Sand with 400 grit sandpaper.

icon
suelos 5

Step 6. Sealing.

To protect the epoxy floor or epoxy screed, you can apply three coats of TOPSEALER WT ALL IN ONE varnish (3 hours drying time between coats) or two coats of TOPSEALER WT ONE COAT varnish (24 hours between coats).

icon
suelos 5

+ Industtrial epoxy microcement application on interior walls

Step 1. Cleaning and preparation of the substrate.

Make sure the substrate is dry, clean, free of dust, grease or dirt. If the walls are varnished or painted, remove the previous coating.

icon
paso 1 atlanttic

Step 2. Priming.

On mineral or cementitious surfaces it is recommended to use the PRIMAPOX family. If dampness is present, use Primapox 100 Barrier

icon
paso 2

Step 3. Pigment and mix.

Homogenise component A and then pigment it with the ARCOCEM PLUS colour toner from the INDUSTTRIAL colour chart. Then add component B and mix the two components (see exact proportions in the data sheet).

icono compatible sistemas acuosos
paredes 3

Step 4. Two coats of Industtrial Base epoxy microcement

For interior epoxy walls, apply two coats of INDUSTTRIAL BASE epoxy microcement with a trowel. Allow to dry for 4 to 12 hours between coats (the exact time will depend on the degree of temperature and humidity). Sand with 220 grit sandpaper after each coat.

icon
paredes4

Step 5. One coat of Industtrial Liso epoxy microcement

To finish decorating the interior walls, apply one coat of INDUSTTRIAL LISO. Allow to dry for at least 48 hours before sealing and sand with 400 grit sandpaper.

icon
paredes5

Step 6. Sealing.

Protect the interior wall with epoxy. Three coats of our TOPSEALER WT ALL IN ONE varnish can be applied (allow 3 hours drying time between coats) or two coats of TOPSEALER WT ONE COAT varnish (allow 24 hours drying time between coats).

icon
paredes

Colours of Industtrial epoxy microcement

Industtrial epoxy microcement is available in 16 colours, offering a multitude of decorative possibilities as a continuous coating for interior epoxy floors and walls. Epoxy resin colours that offer the professional uniform finishes of great beauty and among which stand out those pearly and pearlescent shades that bring elegance and sophistication to the interior design of any room.

The versatility of Industtrial epoxy microcement pigments not only brings distinction and attractiveness to interior epoxy floors. They are also colours that allow the epoxy resin to reach its maximum performance, while boosting the colour and shine of the flooring. A combination that prolongs the useful life of the floors, making them much more durable over time.

Pannacotta Taupe Linen Hazelnut
Wicker Koala Walnut Anthracite
Shadow Black Pure Black Gem Grey Ultimate Grey
Ivory Universe Mocha Patagonia
microcementos
microcementos

Frequently asked questions Industtrial epoxy microcement

We do not recommend using Industtrial epoxy microcement outdoors. This is because the epoxy resin may yellow when exposed to the sun's rays.

Therefore, we recommend using Industtrial epoxy microcement as a decorative and functional finish on floors and walls in interior spaces.

Industtrial epoxy microcement is formulated so that it is not necessary to use mesh, as it is a product that is applied in very thin layers that favour optimum drying. If mesh were used, the layers of product would be much thicker and there would be a risk of cracking.

As with other microcement systems, it is essential to prepare the substrate properly to ensure a good decorative coating. In this sense, the substrate must be well consolidated, have a good planimetry and be free of damp (if this is not the case, it will be necessary to remedy it).

In the case of Industtrial epoxy microcement, the Primapox or Primacem family can be used as a primer. The choice of one or the other will depend on the substrate on which Industtrial is to be applied.

Yes, Primacem ABS (absorbent surfaces) or Primacem Plus (non-absorbent surfaces) can be used without any problem as a primer for Industtrial epoxy microcement. However, to ensure high performance, we recommend using Primapox for a complete epoxy system.

Although our Industtrial epoxy microcement guarantees superior resistance to other systems, including greater impermeability to running water, it is necessary to seal it. With this added protection, Industtrial's durability increases exponentially.

Depending on the finish that each professional is looking for, as well as the features required by the use to which it is going to be applied, Industtrial epoxy microcement can be sealed with different varnishes. Mainly with our water-based varnishes Topsealer WT One Coat and Topsealer WT All in One, as shown in the step-by-step application of the product.

However, to protect the Industtrial epoxy microcement, there is also the possibility of using our solvent-based Topsealer DSV and our 100% solids epoxy varnish Coverpox.

Industtiral epoxy microcement is composed of aggregates, without the need for cement, as is the case with our ready to use microcement Efectto Quartz. For this reason, the application of the Presealer can be avoided and the step-by-step time is reduced.

We have developed a total of 16 colours for Industtrial epoxy microcement, which are the samples shown above. However, if a customer would like to pigment the product with another colour, they can easily do so using our ARCOCEM BASIC.

Whenever we talk about interior spaces, Industtrial epoxy microcement can be used on walls and ceilings. Although it is true that due to its resistance to wear and tear and traffic above all, it is more suitable for use on floors.

No. Industtrial epoxy microcement cannot be applied on façades. As we have already explained, it is not recommended to use this product outdoors due to the real possibility of yellowing of the epoxy resin.

Industtrial epoxy microcement fits perfectly in interior areas exposed to high traffic such as offices, shopping centres, warehouses, etc. Spaces that require more industrial resistance.

Beyond its hardness and resistance, Industtrial epoxy microcement is characterised by its versatility. So yes, if the applicator wishes to achieve a water effect, it can be achieved.