Stamped concrete sealers | Sealcem

Sealcem® WT S100 water-based stamped concrete sealer

Sealcem® WT S100 is a water-based sealer for stamped concrete, polished concrete and microcement. The product is packaged ready for use. Its properties include high transparency and resistance to weathering, as well as to hot-cold cycles, water, abrasion and humidity.

A water-based stamped concrete coating that manages to maintain the original texture of stamped paving while promoting its colour. Highly recommended for protecting carriageways, pedestrian lanes, garage floors, etc. It is perfect for outdoor use.

Sealcem® WT AC70 water-based stamped concrete sealer

Sealcem® WT AC70 is another water-based concrete coating. In contrast to other products, its excellent wet and dry adhesion is worth mentioning. But also its good resistance to hot tyres.

This water-based stamped concrete sealer gives a better penetrability on absorbent substrates. A very natural finish that confers unbeatable resistance to abrasion, alkalinity, water and weathering, among others.

A product resistant to efflorescence and weathering (it does not yellow). For all these reasons, it is a varnish for printed concrete that is highly recommended for application on roadways, pedestrian lanes and cementitious pavements.

Sealcem® WT AC100 waterborne stamped concrete sealer

Sealcem® WT AC100 is another Topciment water-based stamped concrete sealer. Ready-to-use, it is an ideal product for protecting and decorating driveways, footpaths or garage floors.

This coating for stamped concrete and polished concrete maintains the same good mechanical and chemical resistance. It is perfectly resistant to abrasion, water and weathering.

It also has excellent wet and dry adhesion and enhances the colour of stamped and polished concrete floors.

A varnish for water-based stamped concrete that enhances curing and has good adhesion on porous substrates and mineral or cementitious substrates. It is intended for exterior use.

Sealcem® WT PU water-based polyurethane stamped concrete sealer

Sealcem® WT PU is a water-based polyurethane stamped concrete sealer. It is a single component product designed to protect and improve the curing process of concrete in stamped and polished concrete floors.

One of the main peculiarities of this varnish for stamped concrete is its fast drying and easy application. It boasts good adhesion on porous substrates and mineral or cementitious substrates and very good resistance to abrasion, scratching, water and alkalinity.

Sealcem® WT PU is a water-based polyurethane stamped concrete coating ideal for coating exterior surfaces, as it is resistant to ultraviolet light and does not yellow.

It can be applied by roller, brush or spray. A water-based polyurethane sealer for stamped concrete that fits perfectly on other cementitious surfaces such as driveways, pedestrian lanes or garage floors, among others.

Sealcem® DSV M70 solvent-based stamped concrete sealer

Sealcem® DSV M70 is one of our stamped concrete sealers. This solvent-based product has a high adhesion on porous substrates and mineral or cementitious substrates.

It is a solvent-based coating for stamped concrete with good chemical and mechanical resistance in general. Particularly resistant to abrasion, hot-cold cycles, water and humidity as well as alkalinity and efflorescence.

It can also be used as a decorative and protective varnish on concrete and microcement floors. It creates a protective film that improves curing and is ideal for outdoor use, as it does not yellow.

Thanks to its good weather resistance it is a perfect varnish for driveways, footpaths, garage floors, decorative stamped concrete, microcement or concrete floors.

A stamped concrete sealer with a very natural finish that enhances the colour of the coatings on which it is applied.

Sealcem® DSV M100 solvent-based stamped concrete sealer

Sealcem® DSV M100 is another of Topciment's stamped concrete sealers. Solvent-based, it offers high adhesion on porous substrates and mineral or cementitious substrates, as well as good overall chemical and mechanical resistance to abrasion, moisture or alkalinity.

This varnish for stamped concrete also promotes the colour of stamped concrete and polished concrete surfaces, keeping the original texture intact. Sealcem® DSV M100 creates a protective film that improves the curing of the stamped concrete floor.

A solvent-based stamped concrete sealer that does not require dilution and is highly recommended for use on carriageways, pedestrian lanes or decorative stamped concrete pavements, among others.

Its good weather resistance makes Sealcem® DSV M100 a perfect outdoor concrete coating. Like its predecessor, it is non-yellowing and has very good resistance to abrasion, hot-cold cycles and water and humidity.

Sealcem® DSV S70 solvent-based stamped concrete sealer

Sealcem® DSV S70 belongs to Topciment's range of stamped concrete sealers to protect this type of continuous flooring. Solvent-based, this product guarantees above all high adhesion on porous substrates and mineral or cementitious substrates.

Stamped concrete varnish capable of enhancing the colour of stamped and polished concrete floors. A product that also has good mechanical and chemical resistance: to water and humidity, abrasion, alkalinity and efflorescence.

This solvent-based stamped concrete sealer produces a protective film that considerably improves the curing process of decorative pavements and industrial pavements made of stamped concrete, polished concrete and microcement.

Like the two previous coatings, Sealcem® DSV S70 is especially suitable for outdoor use due to its resistance to weathering and cold-heat cycles. A product that enjoys high transparency.

Sealcem® DSV S100 solvent-based stamped concrete sealer

Sealcem® DSV S100 is also part of Topciment's range of stamped concrete sealer. A solvent-based product that, like all other Sealcem products, provides high adhesion on porous substrates and mineral or cementitious bases.

Among its many characteristics, this varnish for stamped concrete ensures good chemical and mechanical resistance to cold-heat cycles, humidity and water, abrasion and alkalinity, among many others.

A varnish for decorative and industrial stamped concrete floors that enhances the colour of the coatings, without modifying their original texture.

Sealcem® DSV Colour coloured stamped concrete sealer

Sealcem® DSV Colour is a coating based on pure solvent-based methacrylic resins used to protect and decorate concrete and stamped concrete floors.

With a satin finish and available in 24 colours, it is a coloured stamped concrete sealer that is characterised by its high covering power. A product that creates a protective film that substantially improves the performance of the floor to be decorated.

A coloured varnish for solvent-based stamped concrete that shows great adhesion on porous substrates and mineral or cementitious bases. It is particularly suitable for outdoor areas thanks to its resistance to weathering, water and cold-heat cycles.