Metallic and rust effect paints| Classic Mettal.

Classic Mettal is our range of ready-to-use metal paints that give the coated surface an authentic metallic finish as they contain metallic particles of copper, bronze, iron and brass, depending on the desired result. The decorative possibilities of these metal paints are endless on non-trafficable surfaces such as walls or furniture. The most attractive finishes give an industrial, sophisticated and original touch to interiors and exteriors.

But the versatility of this innovative paint goes far beyond that. Thanks to the application of our rust activator Mettal Activator, Classic Mettal becomes a rust effect paint that gives the surfaces on which it is applied a very natural aged effect. A rust effect paint that is highly recommended for walls and ideal for replicating that vintage style that never goes out of fashion.

In addition to the varied decorative finishes it offers, Classic Mettal stands out for being a metallic and rust effect paint with great durability, excellent adhesion and high resistance to weathering if the appropriate varnish or sealant is applied. This is why it can also be used without any problems on exterior surfaces such as building facades, pillars or walls.

Types of Classic Mettal metallic and rust effect paints

At Topciment we have five types of Classic Mettal metallic and rust effect paints: Copper, Bronze, Iron 004, Brass and Iron 030. Each of them offers unrepeatable decorative finishes as they allow you to play with the mixtures in such a way that no two coatings will be the same, especially if you use our rust accelerator Mettal Activator.

Types of Classic Mettal

Technical characteristics

It can be applied on any type of surface

microcement, concrete, brick, ceramic, etc.

High adherence to the substrate

In not very absorbent areas we recommend Primacem Plus.

Product ready to use

Do not dilute with water.

Versatility of application

Can be applied with a trowel, brush, sponge, roller or spray gun.

Consumption

The consumption of Classic Mettal metallic and rust effect paints will depend on the substrate to be coated and the application method In a trowel application, the coverage is the following: 0,2 Kg/m².

Packaging

Classic Mettal metallic and rust effect paints are available in 1 Kg containers.

Technical data sheet

Download here the data sheet of Classic Mettal

Classic Mettal metallic and oxide finishes

Below we show the different metallic (left) and oxide (right) finishes that can be achieved depending on the chosen Classic Mettal pigment.

Copper + Mettal Activator

Bronze + Mettal Activator

imagen color classic mettal oxido bronce

Iron 004 + Mettal Activator

imagen classic mettal color oxide hierro ao

Iron 030 + Mettal Activator

imagen color classic mettal hierro grueso AO

Brass + Mettal Activator

Where to apply Classic Mettal metallic and rust effect paints

Classic Mettal paints can be applied on almost any type of material. They are compatible with microcement, concrete, brick, ceramic, glass, plaster, plasterboard or paper, among others. In this sense, it is highly recommended for use as a paint for metal due to its high content of metallic particles.

You will get the most out of walls, ceilings, facades, walls, pillars and furniture with Classic Mettal. You will be able to transform any room into a completely new one that will not leave you indifferent.

Classic Mettal can be applied by trowel, brush, brush, sponge, roller or spray.

Application of metal paints and rust effect Classic Mettal

+ STEP BY STEP

Step 1. Cleaning and preparation of the substrate.
We must make sure that it is well cohesive, dry and if necessary sanded. Vacuum to clean the substrate.

Step 2. Priming.
Apply a coat of Primacem ABS (absorbent substrate) or Primacem PLUS (non-absorbent substrate). Let dry for around 1 hour.

Step 3. Decoration.
Apply one or two layers of the desired Classic Mettal product (Copper, Bronze, Iron 004, Iron 030 or Brass) with a trowel or roller, letting each layer to dry from 2 to 4 hours. Allow to dry for 24 hours and sand.

Step 4.Metallic finish and sealer.
If a metallic finish is required, once the surface has been decorated, apply two coats of Topsealer WT One Coat varnish (allowing 24 hours drying time between applications) to protect the substrate. Allow to dry for 24 hours.

Step 5. Oxidised finish and sealer.
If you are looking for a rusty finish, once the surface has been decorated, apply Mettal Activator to accelerate the oxidation and sand. 24 hours later, apply two coats of Presealer (allowing 4 hours between coats) and sand. Finally, protect the surface with two coats of Topsealer WT One Coat varnish (24 hours between coats). Allow to dry for 24 hours.