menu
Cerrar
  • Topciment United States
  • Topciment United States
  • One-component microcement Evoluttion.

    Evoluttion is the improved line of one-component microcements (cement + water).

    With Evoluttion microcement, mixing and preparation are simplified, thus reducing possible errors. Moreover, it also allows to reduce transport costs.

    Microcemento Evoluttion maintains the good workability of the Sttandard line, with the particularity that it offers an improvement of the mechanical resistances.

    Logo Evoluttion

    One-component microcement for preparation Evoluttion Microbase

    Evoluttion Microbase is the one-component microcement for preparation, also known as rustic microcement if you decide to use it as a finishing microcement.

    In any case, the decorative solutions offered by this coating to the professional are very varied and distinguished. As for its application, it should be noted that it is always used before the application of Evoluttion Microfino and Evoluttion Microdeck.

    Evoluttion Microbase is available in 3 granulometries: L, XL and XXL.

    Download here the data sheet of Evoluttion Microbase

    Types of one-component preparation microcement Evoluttion Microbase

    Evoluttion Microbase
    Evoluttion Microbase L
    Evoluttion Microbase
    Evoluttion Microbase XL
    Evoluttion Microbase
    Evoluttion Microbase XXL

    Technical characteristics

    icon
    Flexural strength

    ≥ 11.90 N/nm2 (28 days)

    Densidad aparente
    Apparent density

    In powder form - 1.175 ± 50Kg/m3
    In paste - 1.545 ± 50Kg/m3
    Hardened - 1.470 ± 50Kg/m3

    icon
    Compression resistance

    ≥ 30 N/nm2 (28 days)

    icon
    Adherence to the substrate

    ≥ 1,5 N/nm2 (28 days)

    Consumption

    Evoluttion Microbase L(2 layers) - 2,20 Kg/m2
    Evoluttion Microbase XL(2 layers) - 2,20 Kg/m2
    Evoluttion Microbase XXL(2 layers) - 2,20 Kg/m2

    Packaging

    Evoluttion Microbase single-component microcement is packaged in 20 kg black plastic conical buckets.

    Logo Evoluttion Microdeck

    One-component finishing microcement for walls

    Evoluttion Microfino is the optimal finishing one-component microcement for walls, facades or furniture, as it is only intended for coating vertical and non-trafficable surfaces.

    It guarantees a silky and smooth finish to the touch and makes it easy to achieve watermarks. These qualities make Evoluttion Microfino a coating of high value in interior and exterior decoration.

    Aesthetically it is a coating that resembles lime stucco with the difference that its finish is much more natural than lime stucco.

    Evoluttion Microfino is available in 3 granulometries: XS, S and M.

    Download here the data sheet of Evoluttion Microfino

    Types Evoluttion Microfino one-component finishing microcement for walls

    Evoluttion Microfino
    Evoluttion Microfino XS
    Evoluttion Microfino
    Evoluttion Microfino S
    Evoluttion Microfino
    Evoluttion Microfino M

    Technical characteristics

    icon
    Flexural strength

    ≥ 8 N/nm2 (28 days)

    Densidad aparente
    Apparent density

    In powder form - 1.005 ± 50Kg/m3 In paste - 1.505 ± 50Kg/m3 Hardened - 1.285 ± 50Kg/m3

    icon
    Compression resistance

    ≥ 29 N/nm2 (28 days)

    icon
    Adherence to the substrate

    ≥ 1,7 N/nm2 (28 days)

    Consumption

    Evoluttion Microfino XS (2 layers): 0,60 kg/m²
    Evoluttion Microfino S (2 layers): 0,60 kg/m²2
    Evoluttion Microfino M (2 layers): 0,60 kg/m²

    Packaging

    The single-component finishing microcement Evoluttion Microfino, especially recommended for walls, is packaged in 15 kg black plastic conical buckets.

    Logo Evoluttion Microdeck

    One-component finishing microcement for floors

    Evoluttion Microdeck is the best one-component microcement for finishing interior floors and floors. The appearance that this microcement gives to the rooms is very natural and elegant.

    But Evoluttion Microdeck can also be applied on stairs, shower trays, washbasins, worktops and walls. Due to its medium-grained texture, the water effect is lower than that of Evoluttion Microfino. Aesthetically, this single-component microcement finish is very similar to polished concrete.

    Evoluttion Microdeck is available in 2 granulometries: M and L.

    Download here the data sheet of Evoluttion Microdeck

    Types of one-component finishing microcement for floors Evoluttion Microdeck

    Evoluttion Microdeck M
    Evoluttion Microdeck M
    Evoluttion Microdeck L
    Evoluttion Microdeck L

    Technical characteristics

    icon
    Flexural strength

    ≥ 10 N/nm2 (28 days)

    Densidad aparente
    Apparent density

    In powder form - 1.175 ± 50Kg/m3 In paste - 1.480 ± 50Kg/m3 Hardened - 1.430 ± 50Kg/m3

    icon
    Compression resistance

    ≥ 40 N/nm2 (28 days)

    icon
    Adherence to the substrate

    ≥ 1,2 N/nm2 (28 days)

    Consumption

    Evoluttion Microdeck M (2 layers) - 1,40 Kg/m2
    Evoluttion Microdeck L (2 layers) - 1,40 Kg/m2

    Packaging

    Evoluttion Microdeck single-component finishing microcement, whose resistance reaches a new level in interior floors, is packaged in 20 kg black plastic conical buckets.

    + Evoluttion one-component microcement application on walls

    Step 1
    Place the mesh on the surface to be coated. Apply Primacem Plus / ABS.
    icon
    icono mesh
    Step 2
    Apply a first coat of Microbase without pigment. Sand.
    icon
    icono paso a paso base
    Step 3
    Apply a second coat of Microbase with pigment. Sand.
    icon
    imagen paso a paso base
    Step 4
    Apply a first coat of Microfino with pigment. Sand.
    icon
    imagen paso a paso microfino
    Step 5
    Apply a second coat of Microfino with pigment. Sand.
    icon
    imagen paso a paso microfino
    Step 6
    Apply two coats of Presealer by roller.
    icon
    imagen paso a paso microfino
    Step 7
    Apply by roller two coats of Topsealer.
    icon
    imagen microfino topsealer

    +Application of Evoluttion one-component microcement on floors

    Step 1
    Place the mesh on the surface to be coated. Apply Primacem Plus / ABS .
    icon
    icono mesh
    Step 2
    Apply a first coat of Microbase without pigment.
    icon
    icono paso a paso base
    Step 3
    Apply a second coat of Microbase with pigment.
    icon
    imagen paso a paso base
    Step 4
    Apply a first coat of Microdeck with pigment.
    icon
    icono paso a paso deck
    Step 5
    Apply a second coat of Microdeck with pigment.
    icon
    icono paso a paso deck
    Step 6
    Apply two coats of Presealer by roller.
    icon
    paso a paso presealer
    Step 7
    Apply by roller two coats of Topsealer.
    icon
    topsealer paso a paso

    Evoluttion one component microcement colours

    Negro Shale Grey Plomo Marron
    Wengue Pizarra Himalaya Cemento
    Café Topo Acero Titanio
    French Grey Piedra París Cobre Plata
    Perla Liquen Blanco Blanco Roto
    Marfil Kalahari Desert Tan Arena
    Mojave Selva Kiwi Azafrán
    Calabaza Azul Noche Azul Profundo Jade
    Carmín Sahara
    microcementos
    microcementos