menu
Cerrar

Polyurethane, water-based and acrylic topcoats |Topsealer.

Topsealer is Topciment's range of sealers designed for the protection of multiple substrates such as microcement, parquet, wood, stamped concrete or metals, among others.

We have a wide variety of varnishes available depending on the material to be protected and the finish to be achieved. Sealers with unbeatable mechanical and chemical resistance to abrasion, water, scratches, stains, sunlight, ultraviolet light and aggressive cleaning products.

Topsealer coatings can be applied both indoors and outdoors and are also capable of creating anti-slip and waterproof surfaces. We offer polyurethane varnishes, water-based varnishes, two-component 100% solids varnishes, acrylic varnishes and even spray varnishes.

Here is an overview of the wide range of Topsealer varnishes.

Logo Sttandard Microdeck
Topsealer WT One Coat

Polyurethane, water-based and acrylic topcoats |Topsealer

Topsealer coatings offer superior protection against abrasion, scratches, stains and sunlight. We manufacture polyurethane, water-based and acrylic coatings.

This water-based varnish, which facilitates the cleaning and maintenance of microcement, is highly resistant to wear, abrasion and scratches, chemicals, dirt and yellowing.

Topsealer WT One Coat polyurethane sealer is suitable for application on multiple substrates: metals, printed concrete and cement floors, parquet and wood.

As for the finishes offered by this polyurethane varnish, we find matt or super matt varnish; satin varnish and glossy varnish.

Download here the technical datasheet of Topsealer WT One Coat

Technical characteristics of Topsealer WT One Coat the Polyurethane, water-based and acrylic topcoats |Topsealer

icono solidos
Solids

30 ±2% Comp.A 100% Comp.B

icono viscosidad
Viscosity

20 - 30" a 25ºC (Copa Ford 4mm) Comp.A Comp.A

Densidad aparente
Density

1,02 ±0,01 g/ml Comp.A
a 25ºC 1,045-1,055 g/mL Comp.B

icono ph
PH Between 7-9 Comp.A

Consumption

The consumption of Topsealer WT One Coat the Polyurethane, water-based and acrylic topcoats |Topsealer is: 0,15 L/m² (2 layers)

Packaging

The Polyurethane, water-based and acrylic topcoats |Topsealer TopSealer WT One Coat is available in 5 L bottle (Component A) + 1 L bottle (Component B)

Logo Sttandard Microdeck
Topsealer WT Anti Slip

Anti-slip and water-based polyurethane

Topsealer WT Anti Slip is an anti-slip water-based polyurethane varnish with a matt finish whose main function is to make surfaces anti-slip.

This two-component polyurethane sealer is especially recommended for protecting microcement, although it can also be used on concrete floors and for renovating parquet.

Thanks to its good chemical and mechanical resistance, Topsealer WT Anti Slip water-based varnish can be applied to the edges of swimming pools, bathrooms and kitchens, floors and corridors in communal areas and concrete ramps and floors.

Download here the technical datasheet of Topsealer WT Anti Slip

Technical characteristics of the anti-slip and water-based polyurethane Topsealer WT Anti Slip

icono solidos
Solids

Comp A: 34 ±2%
Comp B: 100%

icono viscosidad
Viscosity

Comp. A: 14-16s a 25ºC (Copa Ford 4)

Densidad aparente
Density

Comp. A 1,03 ±0,01 g/ml
Comp. B a 25ºC: 1,045 - 1,055 g/mL

icono ph
PH 7,5 ±0,5

Consumption

The consumption of the anti-slip and water-based polyurethane Topsealer WT Anti Slip is:0,12 L/m² (2 layers)

Packaging

Topsealer WT Anti Slip water-based polyurethane varnish is available in 5 L bottles (Component A) + 1 L bottle (Component B).

Logo Sttandard Microdeck
Topsealer WT Anti Slip

Fast-drying water-based polyurethane varnish

Topsealer WT Quick Dry is a Polyurethane, water-based and acrylic topcoats |Topsealer suitable for the protection of microcement.

One of the main characteristics of this water-based polyurethane varnish is that it dries very quickly. In addition, this polyurethane sealant has good resistance to abrasion and chemical agents.

Download here the technical datasheet of Topsealer WT Quick Dry

Technical characteristics of the water-based polyurethane varnish Topsealer WT Quick Dry

icono solidos
Solids

Comp A: 22%
Comp A: 100 %

icono viscosidad
Viscosity

14 - 15s (Copa Ford 4)

Densidad aparente
Density at 20ºC

1,028 g/mL Comp.A
1,045-1,055 g/mL Comp.B

icono ph
PH Between 7 and 9

Consumption

The consumption of the Topsealer WT Quick Dry water-based polyurethane varnish is 0,12 L/m² (2 layers)

Packaging

Topsealer WT Quick Dry water-based polyurethane varnish is available in 5 L bottles (Component A) + 0.5 L bottle (Component B).

Logo Sttandard Microdeck
Topsealer WT Quick Dry

Two-component, fast curing, waterproof cold polyurea

Topsealer Pro+ is a fast curing, two-component cold polyurea that is waterproof against running water and is suitable for the protection of interior microcement and concrete coating surfaces. This 100% solids two-component varnish does not require priming, in fact it is designed to be applied in a single coat as it has the ability to fully penetrate into the pores ensuring a complete seal.

This exclusive high gloss varnish gives an extra hardness to the microcement as well as preventing water vapour transpiration. In addition, this two-component 100% solids varnish has the ability to enhance the colour of microcement and stamped concrete floors in interiors.

If the professional is looking to reduce the gloss of the final finish, a coat of our Topsealer WT One Coat varnish (satin, matt or super matt finish) or a coat of our Topsealer DSV varnish (satin or matt finish) can be applied afterwards. With any of these combinations, the surface coated with microcement automatically acquires a higher scratch resistance.

There are two types of two-component cold polyurea Topsealer Pro + depending on the curing times: Fast and Slow.

Fast curing, waterproof cold polyurea Topsealer Pro + Fast

The two-component cold polyurea Topsealer Pro + Fast intensifies and enhances the colour of microcement and concrete substrates. It is applied by "0 pore" roller or trowel and guarantees excellent resistance to water, wear, certain chemicals and UV light.

This two-component, 100% solids, primer-free varnish enhances the colour of microcement coatings. In addition to its high resistance, it stands out for its remarkable resistance to yellowing.

Download the Topsealer Pro + Fast data sheet here

Fast curing, waterproof cold polyurea Topsealer Pro + Slow

Topsealer Pro + Slow is a two-component, 100% solids, two-component clearcoat that does not require priming. A two-component cold polyurea with the ability to waterproof against running water and protect any indoor microcement substrate as well as concrete floors.

Being a very glossy varnish, this cold polyurea enhances the gloss of the surface as well as its hardness. It is applied in a single coat with a "0 pore" roller (foam roller) or trowel. It has very good resistance to wear, UV light (no yellowing) and some chemicals.

As with the cold polyurea Topsealer Pro + Fast, this two-component, 100% solids, waterproofs the microcement against running water and prevents water vapour transpiration.

Download the Topsealer Pro + Slow data sheet here

Technical characteristics of Topsealer Pro+ cold polyurethanes

icono alto brillo
High gloss
icono secado al tacto
Fast drying

2-3 hours Topsealer Pro + Fast
8 hours Topsealer Pro + Slow

icono viscosidad
Waterproof

Against standing water

icono aplicable exterior interior
Application time

15 minutes Topsealer Pro + Fast
25-30 minutes Topsealer Pro + Slow

Consumption

The consumption of the cold polyurethanes Topsealer Pro + Fast and Topsealer Pro + Slow is 60-100 g / m2 in 1 coat.

Packaging

Topsealer Pro + Fast and Topsealer Pro + Slow two-component 100% solid and waterproof coatings are supplied in a two-component pack of 0.8 kg (component A) and 0.64 kg (component B).

Logo Sttandard Microdeck
Topsealer DSV

Two-component acrylic varnish

Topsealer DSV is a two-component (A + B) solvent-based acrylic polyurethane varnish. This sealer protects surfaces coated with microcement in interiors and exteriors.

This two-component polyurethane sealer confers good resistance to abrasion, scratching, water, ultraviolet light and household cleaning agents.

In addition, it is an acrylic varnish that considerably enhances the colour of micro-cement, concrete, wood or parquet coatings. The three finishes of Topsealer DSV are: matt, gloss and satin.

Download the Topsealer DSV data sheet here

Technical characteristics

icono dureza
Hardness

14 days of curing: 120 seconds

icono alta estabilidad color
Colour

Colourless

icono solidos
Solids

40% Comp.A 39% Comp.B

Consumption

Microfino - 0,17 L/m2
Microdeck - 0,20 L/m2
Microstone - 0,25 L/m2

Packaging

Topsealer DSV two-component solvent-based acrylic polyurethane varnish comes in a 4 L container (component A) + two 1 L containers (hardener component B).

Logo Sttandard Microdeck
Presealer

Water-based acrylic varnish

Presealer is a water-based acrylic varnish formulated on the basis of acrylic copolymers in emulsion that is unalterable to humidity. A sealer that stands out for its easy application, high adhesion and excellent resistance to the alkalinity of microcement coatings.

The special feature of Presealer is that it is a water-based acrylic varnish that can be used both as a swimming pool sealer and as a microcement primer.

Download here the technical datasheet of Presealer

Presealer water-based acrylic varnish as a swimming pool sealer

One of the possible applications of Presealer water-based acrylic varnish is on our Atlanttic system, the microcement for swimming pools. In this case, Presealer acts as a swimming pool sealer, creating a film that protects and consolidates the microcement pools at the same time.

If you want to use it as a swimming pool sealer, it will be necessary to apply two coats of Presealer water-based acrylic varnish using a short-haired microfibre roller. Allow 4 hours drying time between coats.

Presealer water-based acrylic varnish as a microcement primer

The other option for applying Presealer water-based acrylic varnish is as a microcement primer, as it has the capacity to act as a bonding bridge between the microcement and the varnish, consolidating and waterproofing the substrate.

Specifically on our two-component microcement systems (Sttandard and Unlimitted) and on our Evoluttion one-component microcement.

In the same way, two coats of Presealer should be applied with a short pile microfibre roller with a separation of 4 hours between coats. It is then essential to protect the microcement surface with one of our Topsealer WT varnishes.

Technical characteristics of Presealer water-based acrylic varnish

icono secado al tacto
Variety of uses

Presealer water-based acrylic varnish can be used as a swimming pool sealer and/or microcement primer.

icono resistencia alcalis
Highly resistant

Stable in a humid environment and highly resistant to the alkalinity of microcement.

Densidad aparente
Density At 20ºC

1 ± 0.01 g/mL

icono ph
PH Between 7 and 8,5

Consumption

The consumption of Presealer water-based acrylic varnish is: 0,12 L/m² (2 coats)

Packaging

Presealer water-based acrylic lacquer is packaged in 5L containers.

Logo Sttandard Microdeck
All in One

One-component water-based polyurethane varnish

Topsealer WT All in One is a one-component water-based polyurethane varnish specially developed for the protection of our ready-to-use microcement Efectto. It can also be applied on epoxy microcement, parquet or wood.

This polyurethane sealer considerably enhances the colour of ready-to-use microcement and provides high mechanical resistance to both abrasion and scratching.

It has good chemical resistance, is waterproof and resistant to ultraviolet light. Available in matt and satin.

Download here the Topsealer WT All in One data sheet

Technical characteristics of the one-component water-based polyurethane varnish Topsealer WT All in One

icono solidos
Solids

22 ± 2%

icono dureza shore
Hardness Shore D

10 - 11s (Copa Ford 4)

Densidad aparente
Density

1,03 ± 0,01g/cm3

icono viscosidad
Viscosity

50 ± 10 s (In Ford Cup 4mm)

Consumption

The consumption of the one-component water-based polyurethane varnish Topsealer All in One is : 0,2L/m2 (3 layers)

Packaging:

Topsealer WT All in One one-component water-based polyurethane varnish is available in 2 and 5 litre containers.

Logo Topsealer Sray
Topsealer Spray  -  Barniz con pistola

Water-based polyurethane varnish with spray

Topsealer WT Spray is a water-based spray varnish designed to protect surfaces coated with microcement or concrete. In addition to its spray application, unlike other polyurethane sealers, it stands out for its extraordinary hardness and improved chemical and mechanical resistance.

This two-component polyurethane varnish is highly recommended for microcement kitchens and microcement bathrooms. It is perfectly resistant to bleach, detergents, vinegar stains, oil, wine, grease, etc.

Topsealer WT Spray is a water-based spray varnish that is available in gloss and has good resistance to abrasion, scratches, chemical agents, water, alkalis and does not yellow under the action of sunlight.

Download the Topsealer WT Spray data sheet here.

Technical characteristics of the Water-based polyurethane varnish with spray Topsealer WT Spray

icono solidos
Solids

32 ±2% Comp. A
100% Comp. B

icono ph
pH

8 ±1 Comp. A

Densidad aparente
Density

1,15 ±0,01 g/ml Comp.A
1,15 ±0,01 g/ml Comp.B

icono viscosidad
Viscosity

60" ±5 at 25ºC Comp.A (Ford Cup 4)

Consumption

The consumption of the Water-based polyurethane varnish with spray Topsealer WT Spray is : 140 ±10 g/m2 (1 layer)

Packaging

Topsealer WT Spray waterborne polyurethane spray varnish is available in 3 L bottles (Component A) + 1 L bottle (Component B).

microcementos
microcementos