Quick-curing, waterproof, cold, two-component polyurea
Topsealer Pro + is a quick-curing, waterproof, cold, two-component polyurea against running water
that is ideal for the protection of surfaces coated with microcement and concrete indoors. This 100% solid two-component varnish does not use primer (Presealer), in fact it is
designed to be applied in a single layer as it has the ability to fully penetrate the
pores ensuring a total seal.
This exclusive high-gloss varnish adds an extra hardness to the microcement in addition to preventing the
breathability to water vapor. Also, this 100% solid two-component varnish has the ability to
enhance the color of the microcement and imprinted concrete floors indoors.
If the professional were to reduce the gloss of the final finish, they could then apply a layer
of our Topsealer WT One Coat varnish (satin, matte or super matte finish) or a layer of our
Topsealer DSV varnish (satin or matte finish). With any of these combinations, the surface
coated with microcement automatically acquires greater scratch resistance.
We have two types of cold, two-component polyurea Topsealer Pro + depending on the curing times:
Fast and Slow.
Quick-curing and waterproof cold polyurea Topsealer Pro + Fast
The two-component cold polyurea Topsealer Pro + Fast intensifies and enhances the color of microcement and concrete supports. Its application, for which there is no need to prime with Presealer beforehand, is carried out with a "pore 0" roller or trowel and guarantees excellent resistance to water, wear, certain chemical products, and UV light.
This two-component 100% solid varnish enhances the color of microcement coatings. In addition to
presenting great resistance, it stands out for its remarkable resistance to yellowing.
Download here the technical sheet of Topsealer Pro + Fast
Quick-curing and waterproof cold polyurea Topsealer Pro + Slow
The 100% solid two-component varnish Topsealer Pro + Slow also does not use primer. A two-component cold polyurea
with the ability to waterproof against running water and protect any microcement support indoors as well as concrete floors.
Being a very shiny varnish, this cold polyurea enhances the shine of the surface in addition to its
hardness. It is applied in a single coat either with a "pore 0" roller or trowel. It has very good resistance to
wear, UV light (does not yellow) and some chemical products.
In the same way as it happens with the cold polyurea Topsealer Pro + Fast, this two-component 100%
solid varnish waterproofs the microcement against running water, thus preventing water vapor
breathability.
Download here the technical sheet of Topsealer Pro + Slow
Technical features of cold polyureas Topsealer Pro +
Quick drying
2-3 hours Topsealer Pro + Fast
8 hours Topsealer Pro + Slow
Waterproof
Against running water
Application time
15 minutes Topsealer Pro + Fast
25-30 minutes Topsealer Pro + Slow
Performance
The performance of the cold polyureas Topsealer Pro + Fast and Topsealer Pro + Slow is: 60-100 g/m2 (1 coat)
Presentation
The 100% solid and waterproof two-component varnishes Topsealer Pro + Fast and Slow are presented in a two-component pack
0.8 kg (component A) and 0.64 kg (component B)