menu
Cerrar

Polyurethane, water-based and acrylic varnishes | Topsealer varnishes

Topsealer is Topciment's range of sealers designed for the protection of multiple substrates such as microcement, parquet, wood, stamped concrete or metals, among others.

We have a wide variety of varnishes available depending on the material to be protected and the finish to be achieved. Sealers with unbeatable mechanical and chemical resistance to abrasion, water, scratches, stains, sunlight, ultraviolet light and aggressive cleaning products.

Topsealer coatings can be applied both indoors and outdoors and are also capable of creating anti-slip and waterproof surfaces. We offer polyurethane varnishes, water-based varnishes, two-component 100% solids varnishes, acrylic varnishes and even spray varnishes.

Here is an overview of the wide range of Topsealer varnishes.

Logo Sttandard Microdeck
Topsealer WT One Coat

Two-component varnish

Topsealer WT One Coat is a two-component polyurethane varnish used to preserve and protect microcement.

This water-based varnish, which facilitates the cleaning and maintenance of microcement, is highly resistant to wear and tear, abrasion and scratches, chemical products, dirt and yellowing.

Topsealer WT One Coat polyurethane sealer is suitable for application on a wide range of substrates: metals, printed concrete and cement floors, parquet and wood.

As for the finishes offered, we find matt or super matt varnish; satin varnish and gloss varnish.

Download here the technical datasheet of Topsealer WT One Coat

Technical characteristics

icono solidos
Solids

30 ±2% Comp.A 100% Comp.B

icono viscosidad
Viscosity

20 - 30" a 25ºC (Ford Cup 4mm) Comp.A Comp.A

Densidad aparente
Density

1,02 ±0,01 g/ml Comp.A
a 25ºC 1,045-1,055 g/mL Comp.B

icono ph
PH Between 7-9 Comp.A

Consumption

TopSealer WT One Coat(2 layers) - 0,15 L/m²

Packaging

TopSealer WT One Coat is available in 5 L bottle (Component A) + 1 L bottle (Component B)

Logo Sttandard Microdeck
Topsealer WT Anti Slip

Anti-slip varnish

Topsealer WT Anti Slip is an anti-slip varnish with a matt finish which has the main function of making surfaces anti-slip.

This two-component polyurethane sealer is especially recommended for protecting microcement, although it can also be used on concrete floors and for renovating parquet.

Thanks to its good chemical and mechanical resistance, Topsealer WT Anti Slip water-based varnish can be applied to the edges of swimming pools, bathrooms and kitchens, floors and walkways in communal areas and concrete ramps and floors.

Download here the technical datasheet of Topsealer WT Anti Slip

Technical characteristics

icono solidos
Solids

Comp A: 34 ±2%
Comp B: 100%

icono viscosidad
Viscosity

Comp. A: 14-16s a 25ºC (Ford Cup 4)

Densidad aparente
Density

Comp. A 1,03 ±0,01 g/ml
Comp. B a 25ºC: 1,045 - 1,055 g/mL

icono ph
PH 7,5 ±0,5

Consumption

Topsealer WT Anti Slip (2 layers) - 0,12 L/m²

Packaging

Topsealer WT Anti Slip is available in 5 L bottle (Component A) + 1 L bottle (Component B)

Logo Sttandard Microdeck
Topsealer WT Anti Slip

Water-based varnish

Topsealer WT Quick Dry is a two-component polyurethane varnish suitable for the protection of microcement.

One of the main characteristics of this water-based polyurethane varnish is that it dries very quickly. In addition, this polyurethane sealant has good resistance to abrasion and chemical agents.

Download here the technical datasheet of Topsealer WT Quick Dry

Technical characteristics

icono solidos
Solids

Comp A: 22%
Comp A: 100 %

icono viscosidad
Viscosity

14 - 15s (Ford Cup 4)

Densidad aparente
Density at 20ºC

1,028 g/mL Comp.A
1,045-1,055 g/mL Comp.B

icono ph
PH Between 7 and 9

Consumption

Topsealer WT Anti Slip (2 layers) - 0,12 L/m²

Packaging

Topsealer WT Anti Slip is available in 5 L bottle (Component A) + 1 L bottle (Component B)

Logo Sttandard Microdeck
Topsealer WT Quick Dry

Two-component, fast curing, waterproof cold polyurea

Topsealer Pro+ is a fast curing, waterproof, two-component cold polyurea that is suitable for the protection of interior concrete and microcement coated surfaces. This 100% solids two-component varnish does not require priming, in fact it is designed to be applied in a one coat application as it has the ability to fully penetrate into the pores ensuring a complete seal.

This exclusive high-gloss varnish provides extra hardness to microcement as well as waterproofing any type of substrate. We have two types of two-component cold polyurea Topsealer Pro + depending on the curing times: Fast and Slow.

Fast curing, waterproof cold polyurea Topsealer Pro + Fast

The two-component cold polyurea Topsealer Pro + Fast intensifies and enhances the colour of microcement and concrete substrates. It is applied by "0 pore" roller or trowel and guarantees excellent resistance to water, wear, certain chemicals and UV light.

This two-component, 100% solids varnish, which does not require priming, is highly transparent and waterproof, thus preventing water vapour transpiration.

Download the Topsealer Pro + Fast data sheet here

Fast curing, waterproof cold polyurea Topsealer Pro + Slow

Topsealer Pro + Slow two-component 100% solids varnish does not require priming. A two-component cold polyurea with the ability to waterproof and protect any interior microcement substrate as well as concrete floors.

Being a very glossy varnish, this cold polyurea enhances the gloss of the surface as well as its hardness. It is applied in a single coat with a "0 pore" roller or trowel. It has very good resistance to wear, UV light (no yellowing) and some chemicals.

As with the cold polyurea Topsealer Pro + Fast, this two-component 100% solids varnish waterproofs the two-component microcement against running water and prevents water vapour transpiration.

Download the Topsealer Pro + Slow data sheet here

Technical characteristics

icono alto brillo
High gloss
icono secado al tacto
Fast drying

2-3 hours Topsealer Pro + Fast
8 hours Topsealer Pro + Slow

icono viscosidad
Waterproof

Against standing water

icono aplicable exterior interior
Application time

15 minutes Topsealer Pro + Fast
25-30 minutes Topsealer Pro + Slow

Consumption

The consumption of the cold polyurethanes Topsealer Pro + Fast and Topsealer Pro + Slow is 60-100 g / m2 in 1 coat.

Packaging

Topsealer Pro + Fast and Topsealer Pro + Slow two-component 100% solid and waterproof coatings are supplied in a two-component pack of 0.8 kg (component A) and 0.64 kg (component B).

Logo Sttandard Microdeck
Topsealer DSV

Two-component acrylic varnish

Topsealer DSV is a two-component (A + B) solvent-based acrylic varnish. This sealer protects surfaces coated with microcement in interiors and exteriors.

This two-component acrylic polyurethane sealer provides good resistance to abrasion, scratching, water, UV light and household cleaning agents.

In addition, it considerably enhances the colour of microcement, concrete, wood or parquet floor coverings. The three finishes of Topsealer DSV are: matt, gloss and satin.

Download the Topsealer DSV data sheet here

Technical characteristics

icono dureza
Hardness

14 days of curing: 120 seconds

icono alta estabilidad color
Colour

Colourless

icono solidos
Solids

40% Comp.A 39% Comp.B

Consumption

Microfino - 0,17 L/m2
Microdeck - 0,20 L/m2
Microstone - 0,25 L/m2

Packaging

Topsealer DSV is available in a 4 L container (component A) + two 1 L containers (component B hardener)

Logo Sttandard Microdeck
Presealer

Acrylic varnish

Presealer is a sealer formulated on the basis of acrylic copolymer in emulsion and unalterable to humidity. It is therefore ideal for protecting "Atlanttic", the microcement in swimming pools.

Presealer acrylic varnish can be used as a primer system, as it is able to act as a bonding bridge between the microcement and the finish.

Two coats of Presealer should be applied before Topsealer WT One Coat and Topsealer WT Anti Slip.

Download here the technical datasheet of Presealer

Technical characteristics

icono secado al tacto
Dry to touch

20 minutes

icono viscosidad
Viscosity

10 - 11s (Ford Cup 4)

Densidad aparente
Density At 20ºC

1 ± 0,01 g/mL

icono ph
PH Between 7 and 8,5

Consumption

Presealer (2 layers) - 0,12 L/m²

Packaging

Presealer is available in 5L carafes.

Logo Sttandard Microdeck
All in One

One-component polyurethane varnish

Topsealer WT All in One is a one-component water-based polyurethane varnish developed for the protection of our ready-to-use microcement Efectto. It can also be applied on epoxy microcement, parquet or wood.

This polyurethane sealer enhances the colour considerably and provides high mechanical resistance to both abrasion and scratching.

It has good chemical resistance, is impermeable to water and resistant to ultraviolet light. Available in matt and satin.

Download here the Topsealer All in One data sheet

Technical characteristics

icono solidos
Solids

22 ± 2%

icono dureza shore
Hardness Shore D

10 - 11s (Ford Cup 4)

Densidad aparente
Density

1,03 ± 0,01g/cm3

icono viscosidad
Viscosity

50 ± 10 s (In Ford Cup 4mm)

Consumption

Topsealer All in One - 0,2L/m2 (for 3 coats)

Packaging:

Topsealer WT All in One comes in 2 and 5 litre bottles.

Logo Topsealer Sray
Topsealer Spray  -  Barniz con pistola

Spray varnish

Topsealer WT Spray is a spray varnish designed to protect surfaces coated with microcement or concrete. In addition to its spray application, unlike other polyurethane sealants, it stands out for its extraordinary hardness and improved chemical and mechanical resistance.

This two-component polyurethane varnish is highly recommended for microcement kitchens and microcement bathrooms. It is perfectly resistant to bleach, detergents, vinegar stains, oil, wine, grease, etc.

Topsealer WT Spray is a water-based varnish that is available in gloss and has good resistance to abrasion, scratches, chemical agents, water, alkalis and does not yellow under the action of sunlight.

Download the Topsealer WT Spray data sheet here.

Technical characteristics

icono solidos
Solids

32 ±2% Comp. A
100% Comp. B

icono ph
pH

8 ±1 Comp. A

Densidad aparente
Density

1,15 ±0,01 g/ml Comp.A
1,15 ±0,01 g/ml Comp.B

icono viscosidad
Viscosity

60" ±5 at 25ºC Comp.A (Ford Cup 4)

Consumption

Topsealer WT Spray (1 coat) 1 coat: 140 ±10 g/m2

Packaging

Topsealer WT Spray is available in 3 L containers (Component A) + 1 L bottles (Component B).

microcementos
microcementos